Choosing the best concrete cutting in Pukekohe usually comes down to who can get a saw crew onto your site quickly and cut clean lines without damaging the slab you are keeping. The work covers expansion cuts in new pads and driveways, doorway and window openings in block and concrete walls, core drilling for plumbing, drainage and cabling, and controlled removal of old slabs. Concrete cutting in Pukekohe is handled by mobile crews who travel to site with their own saws and drill rigs, and the operators below include Sharp Concrete Cutters and Drillers, working out of Drury, and Concrete Cutters, whose published service area covers Pukekohe and Drury.
1Sharp Concrete Cutters and Drillers
Sharp Concrete Cutters and Drillers is a Franklin based concrete cutting and drilling contractor running a crew of eight technicians from a workshop in Drury, with a postal base at Onewhero. The company covers hand held cutting, floor sawing, wall and wire sawing, core and stitch drilling and slurry control, and its operators work on either side of the Bombay Hills. It suits builders, civil contractors and homeowners in Pukekohe and the wider Franklin district who want a cutting crew close to the job.
Services
- Floor sawing of slabs, driveways, tarseal and asphalt, and expansion joints in new pours
- Core and stitch drilling for services, dowels and larger openings
- Wall sawing and wire sawing for structural openings and controlled removal
- Hand held cutting using electric and petrol handsaws, ring saw and bar saw
- Slurry control, aggregate exposing and acid washing using a vacuum truck
Highlights
- Established in December 2002 by director Raewyn Sharp
- Crew of eight experienced cutting and drilling technicians
- Long term member of the NZCSDA and the international CSDA
- Slurry truck carries 2500 litres of slurry plus 1000 litres of water and a high pressure water blasting unit
- In house mechanic maintaining the cutting and drilling fleet
Location & Contact
Name: Sharp Concrete Cutters and Drillers Ltd
Address: 29 Firth Street, Drury, Auckland 2113
Phone: 0800 232 816
Website: sharpconcretecutters.co.nz
2Concrete Cutters
Concrete Cutters is a South Auckland concrete sawing, drilling and grinding operation whose published service area takes in Pukekohe, Drury and Papakura along with Manukau, Howick, Penrose, Mangere East and Tamaki. The team cuts concrete of any thickness using wire, ring and hand sawing, drills with hydraulic rigs, and carries a full set of grinders for polishing and repair work. It is a practical option for renovation and maintenance jobs where cutting, drilling and surface finishing are all needed by the same crew.
Services
- Concrete cutting by wire saw, ring saw and hand saw
- Core drilling in concrete, brickwork and stone using hydraulic drill rigs
- Concrete grinding, polishing and sealing, including wall finishes
- Floor sawing, decorative cuts and controlled demolition
Highlights
- Service area published down to Pukekohe and Drury from a South Auckland base
- Hydraulic drill rigs covering small delicate holes through to much larger diameters at depth
- Complete selection of grinders on hand for polishing, repair and concrete sealing
- Two direct mobile lines for bookings and quotes
Location & Contact
Name: Concrete Cutters
Address: South Auckland
Phone: 027 479 7808
Website: concretecuttersanddrillers.co.nz
3Northern Concrete Cutters
Northern Concrete Cutters is a family run concrete cutting and drilling company operating from Forge Road in Silverdale, and its stated service area runs from Pukekohe north through to Warkworth, Mangawhai, Maungaturoto and the islands of the Hauraki Gulf. The work is carried out with petrol, electric and hydraulic sawing and drilling machines, and the service list extends to concrete scanning, removal, grinding and polishing. It is worth a call on larger or more technical jobs where scanning before cutting matters.
Services
- Expansion cutting of foundation pads and driveways, plus road cutting
- Sawing of new door and window openings
- Core, dyna and hole drilling
- Wall sawing and wire sawing for accurate openings in floors and walls
- Concrete scanning and rebar detection, concrete removal and polished concrete
Highlights
- Family run, taken over by Dion and Kelli in 2014 from founder Norm Gibbons
- Office side of the business has been in the same hands since 1987
- Specialist high frequency electric and hydraulic cutting and drilling equipment
- Hydraulic wall saw cuts openings in concrete up to 730mm thick
Location & Contact
Name: Northern Concrete Cutters
Address: Unit 5, 81 Forge Road, Silverdale, Auckland
Phone: 0800 55 66 88
Website: ncc.co.nz
Concrete Cutting in Pukekohe at a Glance
| Business | Based in | Highlight |
|---|---|---|
| Sharp Concrete Cutters and Drillers | Drury | Established in December 2002 by director Raewyn Sharp |
| Concrete Cutters | South Auckland | Service area published down to Pukekohe and Drury from a South Auckla... |
| Northern Concrete Cutters | Silverdale | Family run |
How to Choose the Right Concrete Cutter in Pukekohe
- Match the saw to the job: a floor saw for slabs and driveways, a wall saw or wire saw for structural openings, a handsaw or ring saw for tight corners and small cuts.
- Ask whether the crew scans for reinforcing steel and buried services before cutting, particularly on suspended floors and older structures.
- Check how slurry and dust will be captured and removed, and whether the operator has a vacuum truck or wet capture on hand.
- Confirm the operator carries the right power source for the setting, since hydraulic and high frequency electric machines avoid the exhaust fumes petrol saws produce indoors.
- Weigh travel time and callout distance, because a Franklin or South Auckland crew will usually reach a Pukekohe site faster than one coming from the far north of the region.
Frequently Asked Questions About Pukekohe Concrete Cutting
How much does concrete cutting in Pukekohe cost?
Auckland and Franklin operators rarely publish fixed pricing, because the cost depends on the depth and length of the cut, the amount of reinforcing steel in the slab, access to the area, and whether slurry has to be collected and carted away. Most cutters quote on a per job basis after seeing photographs or dimensions, and many will give a rough figure over the phone once you describe the thickness and the run length.
What is the difference between a floor saw, a wall saw and a wire saw?
A floor saw is a walk behind machine used on horizontal surfaces such as slabs, driveways, roads and factory floors, and it is the fastest option for long straight cuts. A wall saw runs on a track fixed to a vertical surface and is used for door and window openings and precise square cuts, on thicknesses up to around 730mm. A wire saw uses a diamond wire loop and is reserved for very thick or awkward sections where no blade will reach, including bridge and foundation work.
Do I need a building consent before cutting a concrete wall or slab?
Cutting an opening in a structural wall, a floor slab or a foundation usually changes how the building carries load, and that generally requires a building consent and often an engineer’s design. Non structural work such as a saw cut in a driveway or a core hole for a pipe normally does not. Check the requirements before booking the cut, since the operator will follow the drawings you give them rather than assess the structure. General guidance is published at building.govt.nz.
How do concrete cutters deal with dust and slurry?
Dry cutting concrete releases respirable crystalline silica, which is a serious health hazard, so most cutting is done wet or with on tool extraction. Wet cutting produces slurry, which is strongly alkaline and cannot legally be washed into stormwater drains or waterways, so it has to be contained and removed. Ask how a crew will control both before they start. WorkSafe publishes guidance on silica dust and respiratory risk at worksafe.govt.nz.
Which parts of Pukekohe and Franklin do these crews cover?
Concrete cutting crews are mobile rather than shopfront businesses, so the practical question is travel distance rather than street address. Operators based around Drury and South Auckland typically cover Pukekohe township, Buckland, Patumahoe, Waiuku, Tuakau, Pokeno and Bombay without difficulty. If your site is rural or hard to reach with a truck, say so when you book, because slurry trucks and floor saws need vehicle access close to the cut.
Can concrete be cut without hitting reinforcing steel or buried services?
Diamond blades will cut through reinforcing steel, so hitting rebar slows a cut and wears the blade rather than stopping the job. The real risk is post tensioned cables, conduit and pipework hidden in the slab. Concrete scanning and rebar detection map what is inside the concrete before the saw goes in, and it is worth requesting on suspended floors, commercial sites and anywhere the original drawings are missing.
How far ahead should I book a concrete cutter?
Small residential jobs such as a doorway or a few core holes can often be fitted in within a week, while larger civil and commercial cuts are usually scheduled around the main contractor’s programme. Booking earlier helps when the job needs a wall saw, a wire saw or a slurry truck, since those units are shared across a crew. Have the slab thickness, cut length and access details ready when you call, as it speeds up the quote.
Are concrete cutters regulated in New Zealand?
There is no occupational licence specific to concrete cutting in the way there is for electrical or plumbing work, so the checks that matter are health and safety prequalification, public liability insurance, and membership of an industry body such as the New Zealand Concrete Sawing and Drilling Association. Site safety accreditation is often required before a crew can work on a commercial site at all, so asking about it is a reasonable filter.
How We Chose the Best Concrete Cutting in Pukekohe
Every business in this guide was found by searching for concrete cutting in Pukekohe, then checked against its own website. Names, addresses and phone numbers are taken from the business’s own site rather than a directory feed, so what you see here is what they publish themselves. We also check that each one is actually based in or genuinely serving Pukekohe, rather than a national operator running a local landing page. A business with no website of its own is not listed, because there is no primary source to verify it against.